The 104X-E4690 is a PCI/104-Express graphics card with an ATI Radeon™ E4690 graphics processor for embedded applications with an excellent performance power ratio. The board adds unprecedented graphics performance to an embedded PC on a small 3.78” by 3.55” printed circuit board. Based on 55nm technology, the E4690 delivers more than double the performance per watt* than previous generation processors. Built with ATI’s PowerPlay™ technology the E4690 has dynamic power management delivering high performance when needed, while intuitively conserving energy at idle or when demand is low. The E4690 graphics processor also allows for exceptional scalability of performance, resulting in power requirements between 8W and 25W. For analog monitors there is a VGA interface and digital ones can be connected to LVDS or DisplayPort. Backlighting is provided for LCD modules, too. The 104X-E4690 is powered over the PCI/104-Express and PC/104-Plus bus connectors and needs no additional power supply. The 104X-E4690 runs under Linux, Windows XP, Windows XP Embedded, Windows Vista and Windows 7 operating systems.
is an octuple Ethernet extension board for EPIC Express CPUs, which can also be used as a carrier board for PCI/104 Express processor boards. Up to two boards are stackable on our new Hurricane-QM57 SBC. Main applications are in the field of security, where each Ethernet channel requires its own independent MAC and MAC-ID and where the higher bandwidth is needed. Drivers are avialble for Windows XP, Windows XP Embedded, QNX, and Linux operation systems.
EXP-ISO-COM8 is an EPIC add-on module, comprising eight independent and flexibly configurable serial ports for RS232 / RS422 / RS485 line levels.
All interfaces are galvanically isolated, thus insuring the integrity of add-on board and processor module. The individual operating modes and the optional terminations are selectable using jumpers. DB9 connectors and four IDC10 headers for cable stubs to DB9 available.
EXP-ISO-COM8 is powered with a single 5 V supply from the PCIe /104 Express connector. It runs under Windows XP, Windows XP Embedded, and Linux operation systems
MPCI-1394 is a MiniPCI module that provides two IEEE 1394 interfaces, accessible via IDC10 connectors. With the included adapter cables from IDC10 to standard 1394 connectors, any 1394 device can be connected to the module.
The used controller VIA Fire IIM VT6307 is a single-chip, low power 2-port IEEE 1394 host controller providing PC systems with high speed, flexible connectivity to a wide range of peripherals and consumer electronics.
The Mini-PCI Serial Extension is an extension board developed especially for LiPPERT’s Thunderbird Mini-ITX-Mainboard, but it can be generally used on every board which features a MiniPCI connector. The adapter adds two serial ports to the system. The UART's are compatible to the standard 16C550. The line interface can be configured with jumpers for the RS232, RS484 or RS422 standard
The Mini-ITX carrier board for COM Express modules provides an easy and inexpensive way to use COM Express modules like LiPPERT's Toucan. The carrier board brings the Toucan's interface out on standard connectors, making the Toucan readily usable for computing. As an additional bonus, a second Gigabit Ethernet port is integrated on the carrier board.
The PC104P-MiniPCI board features three mini PCI slots on a PC/104-Plus board. These slots hold standard mini PCI cards, such as laptop WLAN cards or LiPPERT’s own, spezialized mini PCI cards. The PC104P-MiniPCI‘s PCI resources, PCI Clock, ID Selection, Request, Grant, and Interrupt are selectable with rotary switches. Only a 5 V power supply over the PC/104-Plus is needed. The build-in 3.3 V supply delivers up to 600 mA to each of the the miniPCI cards. The module is transparent to the software, hence all operating systems including Windows XP and Linux can be used.
PC/104-Plus - Quad Universal Serial Bus (USB 2.0) Controller
Four USB 2.0 compatible ports on a single PC/104-Plus module. Transmission speeds up to 480 Mbit/s are supported. Compatible to all USB protocol versions
The PC104P-ETH4 board features four Ethernet controllers on a PC/104-Plus board. The controllers used are Intel 82551’s, which are already supported by many operating systems. The PC104P-ETH4‘s PCI resources, PCI Clock, ID Selection, Request, Grant, and Interrupt are selected with a rotary DIP switch. A separate connection board is bundled with the PC104P-ETH4. It provides four standard RJ45 connectors and can be mounted remotely.The PC104P-ETH4 only needs a 5 V power supply provided by the PC/104-Plus bus connector.Software drivers are available for Windows NT, XP, and CE, as well as for Linux, Netware and FreeBSD.
CoreExpress® - COM Module - Intel® Atom™ Processor
The CoreExpress evaluation kit contains all hardware and software necessary to test and evaluate the CoreExpress-ECO board.
The CoreExpress-ECO module is an advanced technology computer on module (COM) based on the Intel Atom Z5xx processor. This processor offers the best performance-per-watt figures of an X86 module and is complemented by a chipset with integrated graphics. It comes with 2 PCI Express lanes, 8 USB ports, PATA and other digital-only buses.
The evaluation kit comes in a sturdy carrying case and contains the CoreExpress-ECO module, mounted on a carrier board, a large 13.3" TFT display panel, all required cables and a power supply. To ease software setup, either Windows® XP or Linux™ is pre-installed on the included Compact Flash disk. A complete documentation set rounds the kit off.
The evaluation kit is covered by three free hours of direct manufacturer support.
The user only needs to connect a USB keyboard and mouse, the provided display panel, and possibly a USB based touch module, to get a fully operating demo system. See www.CoreExpress.com for more information about the CoreExpress™-Format.
The S-104P-B2I board is an accessory board for PCI-104 CPU boards like the Cool RoadRunner 4. It provides all standard legacy I/O devices for the CPU board, like two serial ports, a parallel port and a floppy controller. Its PCI-to-ISA bridge gives the user the possibility to use standard PC/104 I/O boards together with a PCI-104 CPU board. Furthermore it adds two IEEE 1394 ports, utilizing a VIA6307 FireWire controller. The serial ports can be configured with software to act as an RS232 or RS485/RS422 interface. The necessary termination resistors in RS485/RS422 mode can be activated with jumpers. The parallel port supports all standard modes SPP, EPP and ECP, respectively. The floppy controller supports one 1.44 MB slim line floppy disk drive, which is connected using a flex foil cable. All standard interfaces are located on 2.54 mm IDC headers. A cable set is available to provide the standard PC connectors. The PCI-to-ISA bridge supports all data accesses to I/O or memory devices on the PC/104 bus. Interrupts and DMA are also supported. The DiskOnChip socket allows to add M-Systems DiskOnChip2000 modules as mass storage device. The DiskOnChip is located in a memory window of the CPU. The address range is selectable with software. The programmable Multi-I/O controller is a Xilinx Spartan XC2S15 FPGA device. It is fully connected to the ISA bus and can be programmed from the CPU board. A connector with twenty I/O signals from the FPGA can be used to interface to external hardware. This gives the user the ability to add specialized I/O functions like digital I/O, counters or other custom interfaces to the CPU board.
